TN-200 Rug Adhesive | Rug Glue | 1 Gal (3.79 L)

The rug adhesive TN-200 is used as a second layer for gluing a secondary backing to the back of a rug. It can also be used for gluing a binding tape to the edges of a rug. Perfect for gun tufted rug, punch needle, woven projects or simply to reduce slippage on an old rug. This glue is specially formulated for rug finishing. Its durability and flexibility make it a coveted product by rug makers. It is safe for all types of yarn, natural or synthetic backings, and any flooring surfaces including heated floors. If properly applied, this superior quality adhesive will ensure you that your rug will last forever without any deformation. This rug glue will never become stiff and will not crumble. Once dry, it stays flexible and act as a superior quality non-slip underlay.

+ + + + + + + + + + + + + + + + + +
APPLICATION:
+ + + + + + + + + + + + + + + + + +

► To add a secondary backing, stretch a piece of mesh type fabric cloth (ActionBac©) to the back of your rug directly on your tufting frame, while the first coat of glue TN-100 is still wet. With a large putty knife, apply a thick coat of glue TN-200. Cover the entire surface without exceeding the edges of your rug. When the glue is fully cured, cut the unglued secondary backing all around the rug with a utility knife in order to make clean edges.

► If you prefer to use a piece of felt or cloth to finish the back of your rug, cut a piece of fabric 1/2 inch smaller than your rug. Apply a coat of glue TN-200 to the back of your rug and on your piece of fabric. Once both surfaces are barely dry to the touch, carefully stick your cloth to the back of your rug by applying an even pressure to ensure a good contact between both layers. During the next few hours, you can apply pressure once in a while to make sure that both layers are still in contact one against the other.

► Allow the glue to dry for 12 to 36 hrs before unhooking and handling your final piece.

IMPORTANT: Always use in a well ventilated space. The smell of the glue will dissipate as it dries. Keep this product above 15º C or 60º F. Shelf life of 3 to 6 months from shipping date.

NOTE: We recommend to test this product on a small surface before using it on a larger scale project. This product contain Latex. People suffering from allergies to latex should take proper measures to ensure their safety.

+ + + + + + + + + + + + + + + + + +
ABOUT THIS PRODUCT
+ + + + + + + + + + + + + + + + + +

➤ Ingredients: Natural Latex

➤ Consistency: Thick

➤ Size: 1 Gallon (3.79 L)

➤ Environmentally Friendly and No VOCs

➤ Odor level: very mild ammonia

➤ Drying Time: 12 to 36 hours

➤ Coverage**: 1 Gallon = 100 to 240 sq.ft.

**Disclaimer: it will depend on how thickly you apply the latex, along with the type of material you are applying it to**